本平台为互联网非涉密平台,严禁处理、传输国家秘密或工作秘密

造纸法再造烟叶基片干燥过程中的热分析

Thermal Analysis on Base-sheet of Paper-making Process Reconstituted Tobacco in Drying Process

  • 摘要: 为解决造纸法再造烟叶基片湿片在干燥过程中强度较低的问题,采用热重分析仪和动态热机械分析仪对木浆、烟梗、碎叶、碎末4种单一原料湿片及再造烟叶基片湿片进行了分析。结果表明:①5种原料湿片干燥脱水速度的快慢顺序依次为烟梗湿片 > 木浆湿片 > 碎末湿片 > 碎叶湿片 > 再造烟叶基片湿片;②在5℃/min的升温速率下,木浆湿片的储存模量及损耗模量的峰值远高于再造烟叶原料湿片。木浆的添加有助于提高再造烟叶基片湿片的内结合力,并提高再造烟草基片的力学性能。

     

    Abstract: In order to investigate the reasons for low strength of wet base-sheet of paper-making process reconstituted tobacco in drying process, the thermogravimetric properties of wet state wood pulp, tobacco stem, scraps,tobacco dust and base-sheet were analyzed by Thermogravimetry Analysis (TGA) and Dynamic Mechanical Thermal Analysis (DMA). The results showed that:1) According to TGA, the order of dehydration rate were wet tobacco stem > wet wood pulp > wet tobacco dust > wet scraps > wet base-sheet; 2) According to DMA, the peak values of storage modulus and loss modulus of wet wood pulp sheet were far higher than those of the other materials at the heating rate of 5℃/min, which indicated that the addition of wood pulp could improve the inner combining power and mechanical property of base-sheet of reconstituted tobacco.

     

/

返回文章
返回